Techengy Solutions Group Materials Smart Home Solar Enterprise
Enterprise ICT

Networks that don’t drop,
buffer, or fail.

Slow internet and Wi-Fi dead zones kill productivity. We design and deploy enterprise-grade managed networks that cover every corner of your compound, keep your voice calls crystal clear, and secure your business data.

The problem

Does your current network feel like a bottleneck?

If your team complains about Wi-Fi dropping when they walk to the conference room, if your CCTV cameras lag, or if your internet crashes every time someone downloads a large file—your infrastructure is failing your business. We build networks designed for heavy usage.

  • Coverage measured by walking the building, not by counting access points
  • Cameras and voice on their own VLAN, so a download cannot starve them
  • Switches and access points sized for peak load, not for a quiet Tuesday
Our scope

Four things, and they only work as one.

Four decisions that decide whether your staff can work. Get any one of them wrong and you pay for it every day — in dropped calls, in dead corners, and in the hour someone loses to a file that will not open.

01

Reliable Power & Data

Enterprise switches (Ubiquiti/TP-Link) that power your phones, cameras, and Wi-Fi access points from a single, protected location.

02

Seamless Coverage, Zero Dead Zones

High-density Wi-Fi that allows staff to walk from their desk to the warehouse without their connection dropping.

03

A Foundation Built to Last

Professional Cat6 and fibre cabling, properly labeled and tested, so your network can scale without a messy, expensive overhaul.

04

Secure Traffic Segregation

We separate your guest Wi-Fi, CCTV, and financial data into secure VLANs, ensuring your sensitive business data is never exposed.

The equipment

Why consumer routers fail in enterprise environments.

Ubiquiti UniFi Wi-Fi 6 access point
Wi-Fi 6 access point
White eight-port PoE network switch seen at an angle
Managed PoE switch

The difference is the controller, not the badge.

Plugging in a standard consumer router works for a house, but fails in a business. We deploy unified management systems (UniFi and Omada) that monitor every switch and access point from one dashboard, allowing us to see and fix issues before your staff even notices them.

  • UniFi and Omada both give one controller for switching and wireless, so a change does not mean a visit to each closet.
  • PoE budget is planned per switch: cameras and access points draw more than handsets, and a full rack is not the place to discover it.
  • Guest Wi-Fi is a separate network with its own rules, not the office password written on a card at reception.
Process

Five stages, starting with how the building is actually used.

01

Walk the site

Where people actually sit, where the walls are, what the building is made of. Wi-Fi coverage and cable routes are decided from that, not from a plan drawing alone.

02

Draw the network

Subnets and VLANs, the addressing plan, firewall rules and QoS for voice. Agreed on paper first, because moving a VLAN after commissioning costs a site visit.

03

Cable, rack and label

Containment, Cat6 runs, patch panels and the cabinet. Each link is tested and the results travel with the handover pack.

04

Commission and measure

Switches and access points configured to the plan, then measured: throughput, roaming between access points, and the quiet corners that looked fine on paper.

05

Hand over and support

Documentation, credentials in your name, and a description of what happens if a link, a switch or the internet fails.

Why Techengy

One team for the cable, the switch and the Wi-Fi.

Designed before it is bought

A network is a plan with hardware attached. Coverage, port count, PoE budget and which devices must survive a single failure are agreed before anything is ordered, so the quotation matches the building rather than a catalogue page.

Labelled for the next person

Every cable is labelled at both ends, every panel is documented, and the cabinet layout is handed over as a drawing. The engineer who inherits the site — ours or yours — should not have to tone out forty cables to find one.

One plan across the buildings

Where a compound has more than one block, the link between them is part of the design: fibre or a wireless bridge, its bandwidth, and what happens to voice traffic when it saturates.

The brands, in full

Two brands, and the lines that actually get specified.

Ubiquiti

The network the phones, cameras and access points all share. UniFi is one management plane for switching, wireless and routing.

UniFi switches
PoE switching that powers the handsets, access points and cameras on the cable that already carries their data.
UniFi access points
Wi-Fi 6 coverage with roaming that holds a call as staff walk between rooms.
UniFi gateways and firewalls
Routing, VLANs and VPN for remote staff, in the same controller as everything else.

TP-Link Omada

The same managed-network job where the budget is tighter, with an interface a site IT person can pick up without a training day.

Omada switches and access points
Managed PoE and Wi-Fi under one controller.
Omada routers and gateways
Load balancing and VPN across two links.
Network consultation

How many buildings, and how many people at once?

A floor plan, a headcount and the last time the Wi-Fi dropped a call is enough to start. The survey covers cable routes and cabinet space as well as coverage, because those decide the cost more often than the access points do.

Or call +233 54 925 3380 — the same team answers.